What is the better way to process the screen

Xiao Liu is the purchasing manager of a company. Recently, the company has a demand for screen board processing, which is mainly used for the installation of intelligent mechanical equipment in enterprises, but he doesn't know how to process it. Xiao Liu chose the way of searching the network first and found that there are many ways of machining: linear cutting, laser machining, etching machining, etc., but these ways are different because of their differences, which led to Xiao Liu's difficulties, who has never been involved in the field of machining. So Mr. Zhou, who found Zhuolida's etching process, made a detailed inquiry and finally determined the etching method for screen processing.

Why did Xiao Liu finally make a decision to process the screen by etching? The most important reason is that the thickness of the screen plate is 2.0MM and it needs to be processed into hundreds of meshes with a diameter of 2.0MM. The surface of the traditional laser processing method has a certain burning sensation and the edges of the meshes have certain burrs. Xiao Liu's screen plate is relatively large (length 600* width 1000), which can't be done by conventional etching processing. Therefore, the horn mesh method is made in the realization process, that is, the aperture on one side is 2.0 mm and the aperture on the other side is 1. So why should we consider etching to process the screen? The surface of the product made by etching the screen plate is flat, smooth and delicate, which will not damage the characteristics of the product. Because the mechanical equipment made by Xiao Liu Company belongs to high-precision equipment, a certain number of screen plates are needed, and the laser processing method is slow, and the screen plate is better by etching.